Due to the small geometries of this device, it should be handled with Electrostatic Discharge ESD precautions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.
Register a new account. What happens when the input side LED flashes to “1”, and what happens when it goes off for “0”.?
If we’re taking the MBSIDv2 core schematic as a concrete reference with resistors, we have 5,6k at pin 7 going to ground, and pin 6 is connected to signal out and via a 1,2k resistor to ground. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
Using a resistor between pin 5 and 7 will decrease gain and delay datashest. C free-air temperature at a rate of 0. Such statements are not binding statements about the suitability of products for a particular application.
Search field Part name Part description. I understand that the 5,6k resistor enables the output transistor to operate faster, but what about the 1,2k at pin 7?
Here is datashet 6N datasheet:. Typical values are for information only and are not part of the testing requirements. Compliance with the safety ratings shall be ensured by means of protective circuits. Edited 26 Sep by jjonas.
To the maximum extent permitted by applicable law, Vishay disclaims i any and all liability arising out of the application or use of any product, ii any and all liability, including without limitation special, consequential or incidental damages, and iii any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Share this post Link to post Share on other sites.
To Logic High at Output. Product names and markings noted herein may be trademarks of their respective owners. Sign In Sign Up. Derate linearly above datazheet To Logic Low at Output. I’ve tried R1 values for circuit below at R, 1k, 4.
C, free air temperature at 0. Create an account or sign in to comment You need to be a member in order to leave a comment Create an account Sign up for a new account in our community.
Sign in Already have an account? You need to be a member in order to leave a comment.
If the gate is closed, we get a logic-0, if it’s adtasheet the resistor will pull the level to logic Photodarlington operation is achieved by tying the V. Due to the small geometries of this device, it should be. The circuit that I have is the one below sorry that the image is a bit darkand my question is what function do the resistors Dstasheet and R2 serve, and how would one go about determining the best values.
Access to the base terminal allows adjustment to the gain bandwidth. Started by jjonas26 Sep Posted 26 Sep edited.
6N138 Datasheet Download
Dimensions in inches mm. Refer to wave profile for soldering conditions for through hole devices DIP. Sorry if my original mail wasn’t clear enough. Sign up for a new account in our community. Logic High Supply Current. On the receiving end there is a R resistor to limit the current when the transistor is off and won’t let any current through, so I guess we don’t have to worry about that.?
Agilent (Hewlett-Packard) – datasheet pdf
This is a pull-up resistor. There’s different MIDI datahseet schematics on the net with the value varying a lot from R to 10k, even though datasheft latter was on a 6N which might make a differenceso is it that the output current doesn’t really matter as long as it’s not too bigwhat matters is only whether the voltage at pin 6 is high or low? Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability.